FRC Air Sentinel AMA200, Manual

Page: 11 / 20

AMA200 Rev150720
11
PROGRAMMING
The program access mode is selected and inputs are made using the two pushbutton
switches on the front of the display module. The digital display shows stored data and
operator inputs. (Refer to Figure 1.)
Note:
When entering codes in the program access mode there is a time-out
feature that requires an operator input every three seconds. If an input is
not detected within five seconds the program returns to normal operation.
Inputs
The two pushbutton switches on the front of the display module allows the operator
access to stored data and program functions.
The MENU button is used to display the percent of air remaining in the tank.
Both the MENU and SILENCE buttons are used to enter program codes.
Once a program code is entered, the MENU button selects the digit to change and
the SILENCE button changes the digit or option choice.