Franklin Fueling Systems HEALY VP1000-220-IC, Manual

Page: 7 / 16

7
Tools Required
• 0-100" Water Column Vacuum Gauge
• 9" Lineman’s Pliers
• Assorted Open End Wrenches 1/4" through 3/4"
• Assorted Allen Wrenches
• Wire Cutters/Strippers 18 AWG and 26 AWG
• 3/8" Drill Assembly
• Assorted Drill Bits 1/16" through 7/16"
• 1/2" (5/8" O.D.) Copper Tube Bending Tool
• 1/2" (5/8" O.D.) Copper Flaring Tool
• Assorted Screwdrivers (Flat blade-one must be 1/8"
wide)
• 1 1/8" Sheet Metal Hole Punch (for Potted Conduit
Assembly)
• Copper Tubing Cutter
• Electrical Multi-Meter
• 12" Adjustable Wrench
• 18" Channel Lock Pliers
• (2) 18" Pipe Wrench
• Hand Pipe Threader (for up to 1" pipe)
• Pipe Cutter (for up to 1" pipe)
• Tape Measure
• PTFE Pipe Tape
• 1/2" or 3/8" Ratchet set w/Sockets 1/4" through 9/16" +
3" Extension
Dispenser Access
• Lock-out and tag-out all electrical power to dispenser
being modified.
• Secure dispenser access keys from station
management.
• Remove dispenser panels and open doors as required
for installation.
Before Mounting the Vacuum Pump
• The vacuum pump inlet cover must be accessible for
service.
• Allow spacing for inlet piping test port and ball valve.
• An unobstructed path for the installation of vapor tubing.
• Allow space for electrical conduit components.
• Access point for the potted conduit through the vapor
barrier.
UNLEADED
ELECTRONIC COMMERCIAL
VP1000-220-IC
J-Box
Potted
Conduit
Potted
Conduit
J-Box
VP1000-220-IC
Figure 8: VP1000-220-IC Mounting Examples
Figure 6: Vapor Kit Components with Quantities