Franklin Fueling Systems EVO 600, Programming Manual

Page: 10 / 86

4
WARNING
: Always secure the work area from moving vehicles. The equipment in this manual
is usually mounted underground, so reduced visibility puts service personnel working on it in
danger from moving vehicles that enter the work area. To help prevent this safety hazard, secure
the area by using a service truck (or some other vehicle) to block access to the work area.
WARNING
: Make sure all wiring enters the console’s enclosure through the designated
knockouts. There could be an explosion hazard if you use other openings.
WARNING
: You must run wiring from probes or sensors to the FMS console in conduits that
are separate from all other wiring. Otherwise, there is an explosion hazard.
WARNING
: Substituting components could impair intrinsic safety. EVO™ 600 and
EVO™ 6000 ATGs are intrinsically safe for sensors installed in – Class I, Division 1, Group D –
hazardous locations. Substitution of components could make the energy limiting circuitry in the
system ineffective and could cause an explosion hazard. Repairs to EVO™ 600 and
EVO™ 6000 ATGs, or attached components, should only be performed by a qualified, factory-
trained technician.
DANGER
: Make sure you check the installation location for potential ignition sources such as
flames, sparks, radio waves, ionizing radiation, and ultrasound sonic waves. If you identify any
potential ignition sources, you must make sure safety measure are implemented.
Open source software
EVO™ 600 and EVO™ 6000 ATGs implement open source software released under the General
Public License (GPL) as well as other open source licenses. As a customer, you are entitled to
receive a copy of the licensed source code used within our product, if so desired. Please contact
our sales staff for more information.
Inspection of materials
Visually inspect all components for defects or damage prior to installation. If any defect or
damage is found, do not use the product and contact FFS for further assistance.
Warranty information
See the
FFS Fuel Management Systems & Product Warranty Policy
for all warranty information.
Certified programmer or service person
Only an FFS certified programmer or service person is allowed to access both the user interface
keypad and areas internal to the FMS console.
Station owner or operator
The station owner or operator of the FMS console is only allowed to access the user interface
keypad. Access to areas internal to the console is strictly prohibited.