15
Once activated, the vacation mode will prevent the water softener from regenerating. This may be used if the
house will not be occupied for an extended period of time. The vacation mode is initiated by pressing the VAC
button on the front panel. There will be a 30 minute delay from the time the button is pressed until the vacation
mode is active to allow time for last minute water use.
The vacation mode will automatically deactivate once the water softener detects normal water use.
The revolutionary ECO mode is a forward-looking feature that uses water usage history and a process called
proportional brining to ensure adequate softening capacity for future estimated water use. The water softener
stores historical daily water use data. If the
next day’s anticipated water use requires more softening capacity
than is currently available, the softener will initiate a regeneration process using a fractional portion of the
programmed salt setting. This partial salt regeneration recovers only the depleted portion of the softening
capacity. This proportional regeneration will save in both salt consumption and water use by using lower salt
settings and fewer regeneration cycles.
Ensure the
Rinse
and
Minutes
indicators are illuminated. Using ‘
↑’
and ‘
↓’
, set the desired length of time for RINSE cycle.
After all cycles have been set press either ‘NEXT’ or ‘DONE’
button to return to Home Screen.
Vacation Mode
The VACATION mode may be activated or deactivated by
pressing the VAC button on the front panel. The red LED
light will be illuminated when the vacation mode is
activated.
ECO Mode
The ECO mode may be activated or deactivated by
pressing the ECO button on the front panel. The green
LED light will be illuminated when the ECO mode is
activated.
Display and Operation
– Installer Settings – Cycles (continued)
