– 8 –
CM FS 45 BK
EN
Set temperature
There are four temperature levels.
The coffee temperature levels are defined as follows:
The factory setting can be changed as follows:
X
X
Press the touch key (
10
) and press the touch keys (
7
and
9
) until
the menu option SET TEMPERATURE appears.
X
X
Confirm the menu option with the touch key (
5
). The display shows the
current setting.
X
X
Select another temperature with the touch keys (
7
and
9
). When the
desired temperature is displayed, confirm it with the touch key (
5
).
X
X
Press the touch key (
11
) to exit the menu.
Water hardness
A DESCALE! message is displayed after the appliance has been operated for a
factory set period of time, calculated on the basis of the maximum quantity of
lime scale which may be contained in the water used. If necessary, this period
of operation can be extended, making descaling less frequent, by programming
the appliance based on the actual lime content in the water used.
Proceed as follows:
X
X
Remove the “Total Hardness Test” strip (in front of your manual) and dip it
fully in the water for a few seconds.
X
X
Remove it and wait 30 seconds until its colour changes and a number of
red dots are formed. For example, if there are 3 red dots on the test strip,
you must set the water hardness level to 3.
Note:
If you no longer have a water hardness test, you can find the data in the
table below.
X
X
Press the touch key (
10
) and press the touch keys (
7
and
9
) until
the menu option WATER HARDNESS appears. Confirm the menu option
with the touch key (
5
).
The display shows the current setting.
X
X
Press the touch keys (
7
and
9
) until the established hardness level is
displayed. Confirm the selection with the touch key (
5
).
The appliance is now programmed to provide the descaling warning when
necessary, based on the actual hardness of the water.
Note:
Information on the hardness of the water in your area can be obtained
from the local water board. The table below shows the water hardness setting
your machine requires.
German
hardness
French hardness
Water hardness
machine
0 - 6 dH
0 - 11 fH
7 - 13 dH
12 - 17 fH
14 - 20 dH
18 - 36 fH
> 21 dH
> 37 fH
Summary of Contents for Frames CM FS 45 BK
