F3D Operating Manual
Page 5
3 Position the Unit
Usually, the F3D is positioned at the right-hand side of the fry station.
The fry station line-up is as follows:
Fry Bagging Station
ß
Fryers
ß
F3D Dispenser
The fry basket storage rack must be mounted onto the side of the
dispenser. It can be placed on either the left or right side, but should
be placed on the side closest to the fryers.
Roll the unit into place and connect it to a 110V power outlet. A six-
foot power cord with plug is provided.
4 Check Door Hinges
Check the location of the freezer door hinges.
The hinges should be on the side of the dispenser
farthest from the fryers. If the dispenser is not
received this way, the hinges will need to be
removed and mounted on the correct side. (See
the Technical Manual for instructions.)
5 Unpack Removable Components
Open the accessories carton and unpack the following items (all
pictured in the diagram at the front of this booklet):
§
Hoppers
§
Product chutes (packed inside the hoppers)
§
Wire basket guides
§
Rubber deflectors
§
Freezer bottom
§
Main drip tray
§
Side basket storage rack
§
Side basket drip tray
6 Wash and Sanitize Removable Components
Place all loose components in the sink; wash and sanitize each item.
