F3D Operating Manual
Page 11
Operator Control Panel
6
Store-Closing Procedure
The F3D dispenser must be emptied, cleaned and defrosted every day.
Tip: You can get a head start on cleaning by turning off one lane at some
point after the dinner rush, but before closing. Disassemble and clean the
parts for this lane while still dispensing fries from the other lane.
1 Turn Lanes Off
Press and momentarily hold the
LANE ON/OFF
button until the green
light goes off. Turn off each lane.
2 Turn Main Power Off
Turn off the main power by switching the ON/OFF toggle switch to the
OFF position.
3 Disassemble Unit
§
Remove the hoppers from the freezer.
§
Empty any remaining fries into a holding bin.
§
Store the holding bin in the walk-in freezer.
Tip: Keep an eye on the hopper levels toward the end of the day,
to minimize the amount of fries you will need to store overnight.
