background image

4

ZMI

_001_

2000

1000

69-A

Q

RM312

_#SE

N

_#AQ

U

_#V3

1. Abbreviations and Units

2. Key

Warning!

Failure to observe can result in injury or even death.

Caution!

Failure to observe can result in material damage.

Important!

Failure to observe can cause the product to malfunction. 

Useful information for optimally handling the product.

3. Warranty

Liability is accepted according to the General Terms and Conditions of Business and 
Supply.
Use original replacement parts only!

4. Important Notes

• Installation, commissioning and maintenance are to be performed only by a 

qualified technician according to the instructions provided and in accordance with 
legal requirements and acknowledged rules of technology.

• All technical connection regulations specified by the local water and electricity 

supply utility companies must be complied with.

• All rights reserved to make technical alterations.

5. Application

AQUAMIX self-closing single mixer DN 15 with angled outlet, for connection to hot 
and cold water. Adjustable flow duration.

SW

Width A/F

EA-Nr.

European Article Number

FAR-Best.-Nr.

Franke Aquarotter Order Number

Conversion

1 mm = 0.03937 inches
1 inch = 25.4 mm

All length specifications in the graphics are in mm.

Summary of Contents for AQUAMIX AQRM175





















Reviews: