11
17.1
17.2
17.3
17.4
17.5
Reserved to qualified operators
7
HOW TO REPLACE THE FILTER CARTRIDGE
Attention!: to carry out this or any other maintenance
operation requiring the machine casing to be opened, use
protective gloves to avoid being cut by sharp edges of the
sheet steel.
The Water filter must be replaced one time per year or at least every six
months, if the water flow decreases.
• Open the Front door
• Put the lever in vertical position to stop the water (Fig. 17.1).
• Turn cartridge slowly, until it stops (Fig. 17.2)
• Pull used cartridge straight down and extract from the cooler (Fig. 17.2
- 17.3).
EN
• There may be a small amount of water during cartridge removal.
• Push the new cartridge into filter head and turn until it stops (Fig. 17.4).
• Turn the lever in horizontal position and check if there’re water leaks
(Fig. 17.5).
• Flush the new cartridge for two minutes expelling any trapped air and
carbon fines. Water may run cloudy with air but will quickly clear.
This work, is reserved to a qualified operator.
