background image

3

REMOVAL OF PACKAGING

P

roduct

T

his appliance is marked according to the European directive 2012/19/

UE on Waste Electrical and Electronic Equipment (WEEE). 

B

y ensuring 

this product is disposed of correctly, you will help prevent potential nega-

tive consequences for the environment and human health, which could 

otherwise be caused by inappropriate waste handling of this product.

T

he symbol on the product, or on the documents accompanying the 

product, indicates that this appliance may not be treated as house-

hold waste. 

I

nstead it shall be handed over to the applicable collec-

tion point for the recycling of electrical and electronic equipment.

D

isposal must be carried out in accordance with local environmental regu-

lations for waste disposal. 

F

or more detailed information about treatment, 

recovery and recycling of this product, please contact your local city office, 

your household waste disposal service or the shop where you purchased 

the product.

EN

•  P

lace the appliance in its installation site (chap. 5 - INSTALLATION).

•  C

ut straps 

R

 and remove carton 

C

, polystyrene 

F

 and external plastic 

bag 

S

.

•  D

o away with plastic bags 

S

 and polystyrene 

F

 immediately as they are 

a danger for children.

•  O

nce the appliance is free from its packaging, remove the base 

B

.

2.1  ADVICE ON HOW TO PROTECT THE ENVIRONMENT

P

ackaging

P

ackaging material is 100% recyclable.

F

or its disposal follow your local regulations.

T

he packaging material (plastic bags, polystyrene parts etc.) must be 

kept out of children’s reach as it could be danger ous.

i

nformation

T

his appliance does not contain CFCs (the cooling circuit contains a 

gas that is not harmful to the ozone layer).

F

or further details, please refer to the serial data plate on the appliance.

C

R

R

B

F

S

1

Summary of Contents for ANMX 308 ANMX 309













Reviews: