Frank FOM 1024 MSE-Z, Operating Instructions Manual

Page: 54 / 68

54
8.2.2 Starting and operation
Set main and emergency switch in main switch cabinet to „1!.
Select operating pressure and spray volume, see item 6.2.
Set operating temperature on the thermostat, see item 6.3.
Set dosage of cleaning and prservation/agent, see item 6.7.
Start machine by actuating the START button located on the control box athe the washing
bay.
A T T E N T I O N !
Machine starts with spray gun closed and switches off again immediately.
Select cleaning programme by pressing the START button on the control cabinet of the
washing bay, see item 6.6 operating the safety spray lance, see item 6.4.
9. Taking the machine out of order
Keep the machine running for at least 1 minute with cold water but without the addition of
cleaning agents to flush out all chemical residues.
Release safety lever of the spray gun, close spray gun. The machine is switched off by
means of a pressure switch.
The time sequence of the automatic cutoff system starts. The machine remains in
operating condition until the period sequence has finished.
The machine can only be restarted by pressing the START button again.
For longer periods of non-use and/or maintenance and servicing purposes, set
main and emergency switch to „0“. Open gun until machine is depressurized.
Secure safety lever of the spray gun using the locking device to prevent any
unintentional opening of the spray gun. Turn off water supply. In case of danger
– e.g. leakage on spray appliance or on high-pressure hose pipe –press STOP
button on the control cabinet at the washing bay.
10. Restarting of the machine
When restarting the machine, make sure the machine and particularly the power supply
cord, the high-pressure hose and the safety spray lance are in perfectly good condition.