FRANCO KF53, Manual

Page: 17 / 52

17 KF_U210700
EN
3.4 SAFETY SYMBOLS
On the machine, in a visible location, pictorial danger warnings
have been applied to draw attention to the presence of residual risks
that can not be avoided or sufficiently limited by work organization
measures, methods or systems or technical means of protection.
WARNING
The safety symbols applied to the circulator play an important
safety function.
CAUTION
It is strictly forbidden to remove the safety symbols.
The following shows the position of safety symbols and their
meanings.
SYMBOLS ON PROPELLER SUSTAINING
The symbols below are placed on the air inlet side, applied to the
central propeller sustaining.
The purpose of the symbols is to inform the operator about the
dangers arising from the rotational movement and suction of the
propeller blades.
DANGER
Indicates a residual risk.
MOVING PARTS
Presence of moving parts such as such as
propeller, pulleys and drive belt.
RISK OF CRUSHING
Risk of crushing and/or dragging due to moving
parts.
PROHIBITION OF REMOVAL OF PROTECTIONS
Prohibition of removal and/or tampering with
safety protections (nets).
AIR INLET SIDE
SYMBOLS ON SIDE PROFILE
The icons below are located on the sides of the fan.
The purpose of the symbols is to inform the operator about the
dangers arising from the rotational movement and suction of the
propeller blades.
DANGER
Indicates a residual risk.
MOVING PARTS
Presence of moving parts such as such as
propeller, pulleys and drive belt.
RISK OF CRUSHING
Risk of crushing and/or dragging due to moving
parts.
PROHIBITION OF REMOVAL OF PROTECTIONS
Prohibition of removal and/or tampering with
safety protections (nets).
HEIGHT OF INSTALLATION
The user must install the fan at an height
greater than 2,7m
AIR OUTLET SIDE
> 2,7m