15
KS-KR-KCs-KC56_U211600
EN
1.1 INTRODUCTION TO THE MANUAL
The Instructions Manual for use is the training reference
document prepared by the Manufacturer, for specialized operators
and technicians who will be in contact with the machine throughout
its life cycle.
The purpose of the document is to provide information for proper
use of equipment, from installation to disposal, highlighting the
dangers that can result from improper use.
To obtain good results in the installation environment, you must
carefully follow the instructions in this Manual, particularly avoiding,
the occurrence of technical problems and worker exposure to
health risks.
1.2 SAFETY WARNINGS
The following symbols are used in the User Manual to indicate
the presence of danger and draw the reader’s attention to
important information:
NOTE
This area is included to highlight important notation.
CAUTION
Indicates a reference to the application of safety practices, or
call attention to unsafe practices that could cause personal
injury or damage to the equipment or components or the
environment.
WARNING
Indicates the presence of a hazard that can cause serious
injury if no appropriate precautions are taken.
1.3 PRESERVING THE INSTRUCTIONS FOR USE
There is an obligation to preserve the Owner’s instructions
manual and all publications attached. The operators and the
maintenance personnel must be able to quickly find and consult
this document and the annexes in any situation.
Each fan is supplied with a user manual and its annexes.
Please contact your dealer to request a copy of the manual if you
have lost it or it is unavailable.
NOTE
The Instructions Manual for use is a safety device of the
machine.
It must always stay with the machine throughout the intended
life cycle, including changes in ownership.
The phases of the life of the machine are:
1. transportation and lifting;
2. installation;
3. use and operation;
4. decommissioning;
5. scrapping and disposal.
2.1 IDENTIFICATION DATA OF THE MACHINE
The EC marking certifies that the product conforms to essential
safety requirements laid down by this Directive in the European
Community.
The identification plate with the EC mark is applied to the metal
structure.
It gives the data identifying the Manufacturer, model, serial
number and year of manufacture of the machine, in addition to the
technical data.
2.2 INTENDED USE
Fans for agricultural and industrial applications, intended for the
ventilation of closed environments for the extraction, movement
and destratification of air at atmospheric pressure.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
CAUTION
It is absolutely forbidden to make changes to any component
of the product or replace with non-original spare parts.
WARNING
Use of the products that do not conform to that described in
this document is considered improper and therefore declared
unsafe.
These unintended uses can result in equipment damage and
serious personal injury. Any other use of the product other than
the intended purpose and described in this document is not
appropriate; therefore, the manufacturer is not responsible.
NOTE
This company will not be held responsible for any damage to the
machine and/or personal injury due to non-compliance with the
safety requirements specified in this Manual.
