FRANCO s. r. l. Instruction Manual AP
9
WARNING!
Before making any moves:
a. stop the machine,
b. switch off the power supply,
c. cut off the water supply,
d. wait for the heat exchanger to cool down.
To move the machine, use suitable lifting gear. The weight can be found on the nameplate and in the
manual in section 5.1 "Technical data". Carry out operations with caution, using appropriate personal
protective equipment, taking care that the machine does not suffer shocks or fall, and positioning the
lifting straps correctly.
1.12 Warranty
This appliance is guaranteed for 12 months from the date of manufacture for all faults attributable to a
proven manufacturing or material defect. The warranty does not cover all parts damaged by transport,
bad or incorrect maintenance, neglect, incapacity for use, improper use, tampering by unauthorised
personnel and in any case by causes beyond Franco s.r.l.'s control. - Cervasca (CN). During the
warranty period, Franco s.r.l. undertakes to replace or repair, free of charge, those parts which prove to
be defective at source.
The intervention must be carried out by a qualified and authorised technician.
1.13 Manufacturer's identification data
Manufacturer
FRANCO s.r.l.
Legal and administrative headquarters
VIA NAZIONALE, 80 - 12010 CERVASCA (CN) - ITALY
Contact
Tel.:
(+39) 0171 61.16.63
E-mail:
Web:
www.francosrl.com
1.14 Declarations
The machine is constructed in accordance with the relevant Community Directives applicable at the time
of its placing on the market.
The machine is not among those mentioned in All. IV of Directive 2006/42/EC.
