FRANCO s. r. l. Instruction Manual AP
7
1.7 Applications
The AP series unit heaters are used in the
industrial and civil sectors, in
rooms where you want to
raise the temperature having hot process or central heating water available, or you want to lower the
temperature by having cold water or chiller available.
They are also used in shopping centres, workshops, showrooms, gyms, dairies, etc.
In the
livestock industry,
they
can be used in pig farms to heat farrowing rooms, weaning halls, lean-
tos and corridors, or in chicken farms, in tunnels with longitudinal, natural and chimney ventilation. In
agriculture
they are used for heating or cooling greenhouses and mushroom houses.
The materials used guarantee reliability and durability.
The exchanger is
fitted with copper tubes and aluminium fins with increased pitch and thickness; it is
painted with
cataphoresis
, a treatment that gives it considerable resistance to corrosion;
The structure of
the hot water heater is made of
polypropylene
, a material with a low specific weight
and high chemical (corrosion and acid) and tensile strength.
The fans
used on the AP series are single-phase 4- or 6-pole axial
fans
(with condenser), with IP54
protection (for the AP15 and AP25 versions, IP44). The motors have class F insulation and are equipped
with automatic reset thermal protection. The screws are made of stainless steel.
This machine must only be used for the purpose
for which it was designed:
"Water heating or cooling"
All other uses are to be considered improper and therefore dangerous.
1.8 Versions
AP series unit heaters are available in the following versions:
Code
Model
Heat
airflow rate
Voltage
2408001
AP15
15kW
2,500m³/h
230V 50Hz
2408011
AP25
25kW
2,500m³/h
230V 50Hz
2408021
AP30
30kW
3,500m³/h
230V 50Hz
2408031
AP35
35kW
5,000m³/h
230V 50Hz
2408041
AP40
40kW
6,500m³/h
230V 50Hz
2408051
AP50
50kW
3,500m³/h
230V 50Hz
2408061
AP60
60kW
5,000m³/h
230V 50Hz
2408071
AP70
70kW
6,500m³/h
230V 50Hz
2408081
AP80
80kW
5,000m³/h
230V 50Hz
2408091
AP100
100kW
6,500m³/h
230V 50Hz
1.9 Machine identification data and plates
Each machine is identified by a CE plate on which the machine's reference data are indelibly marked
(Fig. 1.9.1)
Always quote these references for any communication with the manufacturer or service centres.
Fig.1.9.1
