FRANCO s. r. l. Instruction Manual AP
14
•
Remove the 6 battery fixing screws (fig. 4.3.2);
•
If necessary, heat the connections with a heat gun to soften the sealant in the fittings.
•
Slightly tilt the battery in order to push out the fittings (fig. 4.3.3);
•
Unscrew the connections with a parrot spanner while holding the fittings on the coil with a 33
(on AP30 - AP35 - AP40) or 41 (on AP50 - AP60 - AP70 - AP80 - AP100) spanner (fig. 4.4),
and disconnect the water supply and return hoses;
•
Push the battery back into the casing of the unit and pull it out through the opening at the top
(fig. 4.3.5)
Fig 4.3.1
Fig 4.3.2
Fig. 4.3.3
Fig. 4.3.4
Fig. 4.3.5
