FRANCO 1809001 Instruction Manual Download Page 5

 

 

UCP Instruction Manual 

 

 

The equipment may be used by persons with reduced physical, sensory or mental capabilities, or lack of 
experience or knowledge, provided they are supervised or have received instructions concerning the safe 
use of the equipment and an understanding of the related hazards.  

 

1.6 Pictograms 

 

This section explains the meaning of the pictograms that describe the operator's qualification, the hazards 
and  the  obligations/prohibitions  to  be  respected.  Pictograms  allow  to  provide  rapid  and  unambiguous 
information necessary for the correct use of the machine in safe conditions. 
 

PICTOGRAMS RELATED TO THE OPERATOR

’S

 QUALIFICATION 

 

Symbol 

Description 

 

General  labourer

:

 

operator  without  specific  skills,  able  to  carry  out  only  simple  tasks 

following the instructions by qualified technicians. 
 

 

Driver of lifting and handling equipment: 

an operator qualified to use lifting and handling 

equipment  and  machines  (strictly  in  accordance  with  the  manufacturer's  instructions),  in 
accordance with the laws in force in the Country of destination of the machine. 

 

Mechanical maintenance technician: 

a qualified technician, able to operate the machine 

under normal conditions, to run it with jogging inching operation (JOG) with guards off, to 
work  on  the  mechanical  parts  to  carry  out  the  necessary  adjustments,  maintenance  and 
repairs. Typically, he is not qualified to work on live electrical installations. 

 

Electrical  maintenance  technician: 

qualified  technician,  able  to  operate  the  machine 

under normal conditions, to operate it with jogging inching operation (JOG) with protections 
disabled, is in charge of all electrical interventions of adjustment, maintenance and repair. 
He is able to operate inside live cabinets and junction boxes. 

 

Manufacturer's technician:

 a qualified technician made available by the manufacturer to 

carry out operations of a complex nature in particular  situations or, in general, as agreed 
with the end user. The skills are, depending on the case, mechanical and/or electrical and/or 
electronic and/or software. 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 1809001

























Reviews: