Instructions
IR-2 Infrared Relay System
rame
Apply Velcro to the back of the TV where
you intend to mount the
IR Relay Controller
Module (1).
Attach the
IR Relay Controller Module (1)
to the
back of the TV as shown.
Position the self adhesive
Receiver Cable (2)
on
the bottom of the frame with the lights pointing
towards the floor or somewhere that it can be
visible to the TV’s remote control. When operating
a blue light will flash on the receiver indicating a
signal is being received from the remote.
Connect the
power supply
to the “Power +12V”,
connect the
emitter cable
from the front of the TV
to any of the 6 emitter jacks, connect the receiver
cable to the
IR receiver
jack.
Step 3:
Step 4:
Step 5:
Step 6:
1
4
2
3
1
4
3
2
126 Merrimack Street, Methuen, MA 01844
Call 888.TV.FRAME | Main (978) 216-3115
Email [email protected]
FrameMyTV.com
