Frama F-Link
9
9.
Enter the IP settings for F-Link accordingly to your network.
Example:
Press button “Apply”. -> F-Link reboots. Wait until Ready LED of the F-Link is on again.
(The execution of the command may need to be confirmed in the internet web browser)
10.
Turn off F-Link.
11.
Disconnect direct LAN network cable between F-Link and PC.
12.
Set the LAN network settings of the PC back to the previous values (refer to your notes).
13.
Connect the F-Link device to the LAN network for the operation with the franking system.
14.
Turn on the franking system and the F-Link.
15.
Execute business processes on the franking system when the Ready LED of the F-Link is on.
It’s also possible to change to a static IP address when F-Link uses currently a DHCP IP address. In this
case the dynamic assigned IP address has to be entered into the browser address field. Processes for
finding out this address are described in Chapter 4.1.3.