15
•
Never use your Dishwasher without a filter.
•
Incorrect fitting of the filter will reduce the washing effectiveness.
•
Clean filters are necessary for proper running of the machine.
Spray arms
Make sure that the spray holes are not clogged, and that no food waste is stuck to the spray arms. If there is
any clogging, remove the spray arms and clean them under water. To remove the upper spray arm, undo the
nut holding it in position by turning it clockwise and pulling it downwards. Make sure that the nut is properly
tightened when refitting the upper spray arm.
Drain Pump
Large food residues or foreign objects which were not captured by the filters may block the waste water
pump. The rinsing water will then be above the filter.
Warning Risk of cuts!
When cleaning the waste water pump, ensure that you do not injure yourself on pieces of broken glass or
pointed implements.
In this case:
1.
First always disconnect the appliance from the power supply.
2.
Take out baskets.
3.
Remove the filters.
4.
Scoop out water, use a sponge if required.
5.
Check the area and remove any foreign objects.
6.
Install filters.
7.
Re-insert baskets.
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
The program does not start.
Your Dishwasher is not plugged in.
Plug your Dishwasher in.
Your Dishwasher is not switched on.
Switch your Dishwasher on by pressing the
On/Off button.
Fuse blown.
Check your indoor fuses.
Water inlet tap is closed.
Turn on the water inlet tap.
Your Dishwasher door is open.
Close the Dishwasher door.
Water inlet hose and machine filters are clogged.
Check the water inlet hose and machine
filters and make sure they are not
clogged.
11. TROUBLESHOOTING