Installation
EMG 1500 Operating Manual
6
3. Installation
3.1 Mounting
The EMG 1500-PN has a standardized enclosure for mounting on
a 35mm DIN rail. It can be mounted in any orientation.
Important:
The instrument is only intended for installation in distribution
boards or control cabinets. When the instrument is in
operation, it must not be possible to touch the instrument
terminals.
3.2 Electrical connections
The instrument is connected according to the wiring diagram on this
page.
Important:
The instrument must be disconnected from the power supply
when being installed or serviced.
1
2
3
32
29 31
230V
∼
50/60Hz
A B
2A
L1
N
PE
max.
2m
A
B
A
B
FRAKO Starkstrombus
EMG 1500-PN
⊥
⊥⊥
⊥
see Section 3.2.3
L N
Run
Figure 1: Wiring diagram
