Fractal Audio MFC-101 MARK III Owner'S Manual Download Page 72

Page: 72 / 96

SETUP MENU REFERENCE

Fractal Audio Systems MFC-101 Manual

12.5.3

MFC-101 Display Offset

EDIT : SETUP : PAGE



(3x)

MFC-101 Display Offset

is used to offset the numbers of MFC-101 presets so they match the preset numbers of a connected

Axe-Fx using display offset (causing its presets to be numbered 1-384 instead of 0-383).

NOTE:

This is purely a user interface setting and does not impact MIDI output.

12.5.4

MIDI Channel Display Offsets

EDIT : SETUP : PAGE



(4x)

MIDI Channel Display Offsets

is used to set up the MFC-101 so that its user interface shows program numbers beginning from

1 instead of 0 for a connected device located at a given MIDI channel.

The



PARAMETER



footswitches move between MIDI Channel and Display Offset parameters.

Change this setting to 1 for the MIDI channel of any connected device which numbers its presets from 1 instead of 0.

NOTE:

The MFC-101 has a separate dedicated Display Offset setting for a connected Axe-Fx (

12.5.2

NOTE:

This is only a user interface setting. It makes the preset numbers shown in the MFC-101 Preset Program Change menu

(

12.1.2

) match the numbering of presets on a connected device. This setting does not affect MIDI output.

12.5.5

MIDI Channel Names

EDIT : SETUP : PAGE



(5x)

MIDI Channel Names

is used to set “friendly” names representing the various devices connected to the MFC-101 on MIDI

Channels 1-16.

The



PARAMETER



footswitches move the cursor between the MIDI Channel parameter and individual characters of the

MIDI Channel Name.

The name of a selected channel appears briefly as a memory aid when the

NAMES

footswitch is pressed while the cursor is in

any “Midi Channel” parameter on any MFC-101 menu page.

MFC101DisplayOfst 0

Ch01 DisplayOffset 0

Ch 01 Name Chan 01

Summary of Contents for MFC-101 MARK III

































































































Search results

Summary of Contents for MFC-101 MARK III

Reviews:

Related manuals for MFC-101 MARK III

Brands by name

Popular brands

Fractal Audio MFC-101 MARK III, Owner'S Manual

Search results

Summary of Contents for MFC-101 MARK III

Reviews:

Related manuals for MFC-101 MARK III

Brands by name

Popular brands