Fractal Audio MFC-101 MARK III Owner'S Manual Download Page 63

Page: 63 / 96

Fractal Audio Systems MFC-101 Manual

MIDI MENU REFERENCE

Doc v2.15

12.4

The MIDI Menu

The MIDI menu is used to set parameters which determine the MIDI output of the MFC-101.

12.4.0

MFC-101 Port

EDIT : MIDI

Axe-Fx MIDI Channel

is used to set the channel on which the MFC-101 and Axe-Fx will communicate. For AXE-FX MODE to

work properly, this setting must match that of the Axe-Fx under I/O : MIDI : MIDI CHANNEL.

12.4.1

Axe-Fx MIDI Channel

EDIT : MIDI : PAGE



(1x)

Axe-Fx MIDI Channel

is used to set the channel on which the MFC-101 and Axe-Fx will communicate. For AXE-FX MODE to

work properly, this setting must match that of the Axe-Fx under I/O : MIDI : MIDI CHANNEL.

12.4.2

Axe-Fx TotalSync

EDIT : MIDI : PAGE



(2x)

Axe-Fx TotalSync

causes the MFC-101 to follow presets loaded via the front Panel of the Axe-Fx II or Axe-Edit.

TotalSync is designed for basic, default MFC/Axe-Fx II interactions only:



MFC-101 SONG and SET modes are not supported.



Custom MFC-101 Tx Map or Axe-Fx II preset remapping are not supported. (Presets loaded from the Axe-Fx II front
panel will load in their default MFC-101 bank/footswitch locations despite re-mapping.)



Axe-Fx Standard and Ultra are not supported.



Axe-Fx II firmware version 6.0 or better is required.

Use Port EXPANSION

Axe-Fx MIDI Ch 01

Axe-Fx TotalSync ON

Summary of Contents for MFC-101 MARK III

































































































Search results

Summary of Contents for MFC-101 MARK III

Reviews:

Related manuals for MFC-101 MARK III

Brands by name

Popular brands

Fractal Audio MFC-101 MARK III, Owner'S Manual

Search results

Summary of Contents for MFC-101 MARK III

Reviews:

Related manuals for MFC-101 MARK III

Brands by name

Popular brands