Fractal Audio MFC-101 MARK III Owner'S Manual Download Page 62

Page: 62 / 96

COPY MENU REFERENCE

Fractal Audio Systems MFC-101 Manual

12.3.2

Copy Song

EDIT : COPY : PAGE



(2x)

Copy Song

is used to copy MFC-101 Songs from one location to another.

Use the



PARAMETER



footswitches to move between the Source Song and Destination Song parameters.

To execute, press

ENTER

. The MFC-101 will display

SONG COPIED!

and then return to this page.

12.3.3

Copy Set

EDIT : COPY : PAGE



(3x)

Copy Set

is used to copy MFC-101 Sets from one to another.

Use the



PARAMETER



footswitches to move between the Source Set and Destination Set parameters.

To execute, press

ENTER

. The MFC-101 will display

SET COPIED!

and then return to this page.

12.3.4

Copy Instant Access Switch Setting

EDIT : COPY : PAGE



(4x)

Copy Instant Access Switches

is used to copy the settings from one Instant Access Switch to another.

Use



PARAMETER



footswitches to move between Source IA Switch and Destination IA Switch parameters.

To execute, press

ENTER

. The MFC-101 will display

IA SWITCH COPIED!

and then return to this page.

12.3.5

Copy Internal Control Change Setting

EDIT : COPY : PAGE



(5x)

Copy Internal CC

is used to copy the settings from one Internal CC to another.

Use the



PARAMETER



footswitches to move between the Source and Destination Internal CC parameters.

To execute, press

ENTER

. The MFC-101 will display

INT CC COPIED!

and then return to this page.

Copy Song 001 to 001

Copy Set 01 to 01

Copy IASw 000 to 000

Copy IntCC 000 to 000

Summary of Contents for MFC-101 MARK III

































































































Search results

Summary of Contents for MFC-101 MARK III

Reviews:

Related manuals for MFC-101 MARK III

Brands by name

Popular brands

Fractal Audio MFC-101 MARK III, Owner'S Manual

Search results

Summary of Contents for MFC-101 MARK III

Reviews:

Related manuals for MFC-101 MARK III

Brands by name

Popular brands