Construction Hoist Fraco SEH Premium Range
Assembly and Operating Manual
Page 47 of 69
doc no. 98030718-01
9 Dismantling
(disassembly)
The same regulations and safety notes as described in section 7 apply for dismantling.
Also, make sure that disassembly is carried out generally in reverse order to assembly:
First dismantle the landing level safety equipment (fit three-part protection first).
Then check whether all mast connection bolts are in contact.
The car must be stopped in such a way that the mast joint of the mast to be removed is
located over the upper edge of the sliding carriage.
Only release the mast anchors if there are no longer any mast sections above the an-
chor.
Always unload the car in the interim (the hoist cannot be moved if overloaded).
