Construction Hoist Fraco SEH Premium Range
Assembly and Operating Manual
Page 39 of 69
doc no. 98030718-01
7.12 Inspection after assembly and before each start of operation
Check
that:
-
The gear rack is adequately greased.
-
The prescribed maintenance work and inspection procedures have been implemented
-
There is no oil leakage at the gear motor
-
The supply cable has a sufficient cross section
-
The direction of rotation for the motor agrees with the UP/DOWN button movements
-
The trolley cable length is sufficient for the assembly height
-
The danger zone at the lower loading point is cordoned off.
-
Plates/notices are present and legible (see Technical data)
Carry out a test run with a
loaded
car and check whether the brake functions correctly.
Check whether the car control, ground control and level control are functioning correctly.
Trolley cables, mains supply line and control lines must not show any damage
Test the function of the over speed safety brake by a brake test. (See safety brake man-
ual.
Give handover report and documentation to the user.
Give ground control key to the authorized and instructed person.
