32
English
1000 means a deactivated LCN.
BAND: to manage the program bitrate monitoring by means of the following parameters;
MONITORING: to enable/deactivate the program bitrate monitoring if it has not been added to the channel list.
This enables verifying whether the program has been included in the output mux or not, according to the program bitrate;
MEDIUM VALUE: to view the program average bitrate value;
PEAK VALUE: to view the program peak bitrate value;
PROGRAM PROP.: to view useful data about the programs;
PROGRAM NAME: to view the program name;
PROVIDER NAME: to view the provider name;
INPUT: to view the corresponding input provenance;
PROGRAM TYPE: to view the program type (TV, RADIO…);
SERVICE ID: to view the program service ID;
ADVANCED CONFIGURATION
COUNTRY SELECT: to select the installation country;
TSID: to view and change the ID associated to the transport stream by the broadcaster.
-
SYSTEM SETUP MENU: to set the parameters relevant to the system operation.
SYSTEM FLOW CHART
D-MATRIX
INSERT PIN
PIN NOT VALID
FACTORY RESET?
MAC ADDRESS
WEB SERVER PORT
DNS
GATEWAY
NETMASK
XXX.XXX.XXX.___
XXX.XXX.___.XXX
XXX.___.XXX.XXX
___.XXX.XXX.XXX
IP
ENABLE DHCP
NETWORK
CU SETUP
DATE & TIME
MONITORING
MONITOR ENABLE
HISTORY SPAN
SAVE HISTORY
CLEAR HISTORY
EMAIL ADDRESS
SEND TEST EMAIL
YEAR
MONTH
DAY
HOUR
MINUTE
Pin errato
Dopo 3 inserimenti errati
NETWORK: to configure the network by using the following parameters:
ENABLE DHCP: To enable automatic management of network parameter allocation, if the subnet has a DHCP service.
It is deactivated as default (for expert users).
NOTE: Do not enable the DHCP function if the network parameters have been set as indicated below)
IP: to enter a UP address, which is compatible with the address detected by the LAN network settings, to which you want to connect the
D-MATRIX 4S EVO (default 192.168.0.2)
