MA NUAL
RAY- LG X 1X X
Page 5
RAY-LG x1xx Manual
Version: 20170524
EN
▪
Although the RAY-LG is not sensitive to direct sunlight,
avoid all unnecessary exposure if possible, especially
to the receiver.
▪
Avoid interference from blinking lights or infrared light
sources such as photo cells or other light curtains.
▪
Do not install the RAY-LG in places where the emitter
and receiver edges are directly exposed to light
sources such as FL tubes or energy saving lamps.
▪
Make sure to place the connection plugs for both the
emitter and receiver at the same end.
Alignment
The optical axis of the emitter (Tx) and the receiver edge
(Rx) need to be aligned towards each other to ensure the
light curtain functions reliably.
Reflective surfaces near to or parallel to the detection area
can cause reflections and interfere with the RAY-LG's func-
tions. Keep a reasonable distance between the sensor
edges and any reflective
surface.
CAUTION
Damage to the Eye
Although the RAY-LG does not emit dangerous
amounts of infrared light, long exposure to in-
tense infrared light sources can result in dam-
age to the eyes.
- Never look directly into the active infrared
emitter from a close distance
Possible health risks -
Disregarding these
warnings can result in injury
