Slika 1.
- Unscrew the M12x30 screw on the rear of the cutter blade (Fig. 1, Item 1) and then remove the slider
located below the bend.
- Remove the splinters (fig. 1, item 2) provided by the shafts (figure 1, items 3 and 4) for the
connection of the cutting device and the supporting structure, and then remove the shafts from the
eyelets.
- Lubricate the fuselage and holes on the eyelets with multi-purpose lubricant.
- Insert the blades of the cutting device (fig. 1, item 5) into the eyelets on the couch, and then insert the
shafts (fig. 1, items 3 and 4) into the holes on the eyelets and resistors (Figure 1, Item 2) lift the cutting
machine, place the slider on the hub and then secure it with the previously removed M12x30 screw.
- Connect the chainsaw for holding the cutting apparatus (fig. 1, item 6) using a tweezer (fig. 1, item 7)
with a tension on the cutting machine (fig. 1, item 8).
- Connect the crank lever (fig. 1, item 9) to the ball of the movable battens (fig. 1, item 10). Fasten the
joint with a screw, a roller nut and a fork (fig. 1, item 11).
- Insert multi-purpose lubricant before installing the joint in the lever with a cup.
WARNING:
The joint must be properly attached, otherwise it will be bumped
during operation and the ball and lever with a cup will be damaged.
- On the shaft (fig. 2, item 1), fix the wooden guide of the grass (fig. 2, item 2).
- Connect the spool (fig. 2, item 1) using the screw (fig. 2, items 3,4 and 5) to connect the springs and
nuts with the beak (fig. 2, item 6) on the cutting machine.
