- The user of the rear tractor mower is responsible for the safety of people and animals that are found
in the area of use, so make sure that the other person is not nearby when working. One should
always think of the consequences of irresponsible work because they are irreparable.
- On sloping terrains, make sure that there is no slipping and overturning with a mower, rain
or moisture accelerates the sliding of the tractor, as well as the accumulation of mud on double
fingers on the cutting so avoid working in a humid terrain.
- All cleaning and maintenance work on the rear tractor must only be carried out when the
tractor is stopped and the drive shaft is deactivated.
- Check the lubrication as well as other sliding surfaces.
- Check the degree of damage to the cutting edges of the blade and, if necessary, sharpen the blades
in order to maintain proper cutting.
- Where there is a likelihood of a hidden obstacle working with more attention and slower speed.
- In order to avoid the drift of the rear tractor mower, both in work and in transport, it is mandatory
to use tractor stabilizers, or chains that are accompanying tractor equipment.
- When working on the drive mechanism of the mower, a protective
sheet metal must be used.
- In order to ensure safe operation with the mower, follow the instructions given in this
manual.
DESCRIPTION OF THE REAR TRACTOR MOWER
The rear tractor mower consists of:
- Bearing constructions with transmission,
- Cutter.
The supporting structure consists of:
- Connecting part,
- Cutter carrier.
The supporting structure is constructively resolved so that, in addition to its basic purpose - the
function of attachment to the tractor and carrying the transmission with the cutting machine, it also has
the task to enable the cutting apparatus to better copy the terrain with the help of the system of swivel
joints and levers.
Also within the supporting structure there is a safety system which, in the event of an impact of the
cutting device in a hidden obstacle, makes it unroll and turn, thereby protecting it from damage.
The system for transferring movement from the output shaft of the tractor to the movable cutting bar
consists of: a cardan shaft, a gearbox with wedge belts and a flywheel with an eccentrically mounted
sleeve and crank levers.
The cardan shaft is connected at one end with the drive shaft of the belt drive and the other is
connected to the output shaft of the tractor. The transmission gear consists of a drive and driven pulley
connected with two v-belts. The crochet lever at one end is connected to the flywheel and the other end
is connected to the movable cutting lath.
AGGREGATING THE MOWER TO A TRACTOR
Before starting the mower attachment to the tractor, it is necessary to connect the independently
delivered assemblies.
- With the cutting machine, release the shaft and the wooden grass guide
