1. The mask on the front joint.
Every 8 hours
2. The reverse part of the liner on the front of the cardan.
Every 40 hours
3. The internal telescopic part of the tube
Every 20 hours
4. The reverse part of the cover at the rear of the cardan
Every 40 hours
5. The back swing mask
Every 8 hours
6. The front axle and the rear part
Every 40 hours
7. Clean all parts of the shaft when it has been out of use for a long time
If you act on this lubrication plan, you will achieve a longer life of the shaft. Clever maintenance keeps
you from failures that can arise from heating the bearing, damage to the bearing or increasing the axial
force. Lubricate the cardan shaft at marked points, only with high quality lubricant.
LUBRICATE ALL THE TURNING, SLIDING AND JOINT CONNECTIONS ON THE
MOWER FRAME
PRAVILNIM I REDOVNIM PODMAZIVANJEM OSIGURA
Ć
EŠ NESMETAN I SIGURAN RAD
SA TVOJOM KOSA
Č
ICOM.
strana 18
