- To facilitate the attachment to the tractor, remove the footrest and position it so that the bearing - the
rack is lifted as far as the connecting points reach the height of the lowered tractor levers (Fig. 3, see
broken lines).
- Move the tractor backwards and pull the connecting sleeves on the bearing of the mower (Fig. 3,
items 4 and 5) into the joints on the tractor levers, and then extend the upper tractor lever - warming
(fig. 3, item 1) to lock the shaft (Fig. 3, Item 2) and fuse (fig. 3, pos.3) on the mower's frame.
- Connect the cardan shaft to the output shaft of the tractor. Connection is carried out in such a way
that the finger presses the fuse and the cardanl shaft attachment is attached to the output shaft of the
tractor, after which the fuse is released by lifting the finger and thus the attachment fork is secured
from the draw.
- Ensure that the cardan shaft is secured by tying the chain to the upper tractor lever - warming.
ADJUSTING THE MOWER FOR WORK
In order to ensure the correct operation of the mower, it is necessary to make the necessary
adjustments before starting work. A flat surface should be selected for adjustment.
- Release the mower restraint for the transport position (Fig. 3, Item 8) and attach it to the eyelet
located on the mower's frame.
- Unscrew the handle of the mower holder in the vertical and remove it (fig. 3, item 10).
