FP ultimail Operator'S Manual Download Page 163

Page: 163 / 214

Troubleshooting

163

…

when setting franking imprint and franking

Franking not possible.

No access card inserted.
Insert USER card or MASTER card.

Card is not properly inserted.
Insert card correctly. (Chip must face down!)

Card reader does not recognise access card.
Remove access card and insert again.

No product of Royal Mail / no postage value is set.
Read

chapter 5.1, page 23

Franking is not possible
with the postage value set.

No postage in the franking machine.
Please load postage!

(See chapter 9, page 63.)

Too low credit of current account. Have assigned new
budget from system administrator.

Franking imprint is
incomplete (e.g. ultimail
only prints the logo).

Functions are ‘missing’ in
the home menu.

The ultimail is not in ‘Metering’ (franking) mode.
Status line shows current mode.

Press the C/CE key for 3 seconds.
For setting the mode, read

chapter 13.1, page 95

Label franking:
– misfeeding
– jam.

Before loading the label dispenser: Loosen labels.

You have used unsuited labels.
Only use original labels from Francotyp-Postalia.

Put in a maximum of 40 labels (as pre-packaged).

Letter jam.

Read

“Removing letter jams” on page 170

Logo from USER card is
not automatically set when
the card is inserted.

The standard logo for the account set in the account
administration menu takes priority over the logo from
USER card.

Set the logo from USER card for the relevant account
as default logo

(see chapter 10.2.1, page 69)

Problem

Possible cause and remedy

Summary of Contents for ultimail























































































































































































































Search results

Summary of Contents for ultimail

Reviews:

Brands by name

Popular brands

FP ultimail, Operator'S Manual

Search results

Summary of Contents for ultimail

Reviews:

Brands by name

Popular brands