manualshive.com logo in svg

FP ultimail, Operator'S Manual

Share
Download
FP ultimail Operator'S Manual Download Page 124

ultimail Operator Manual

124

13.15.2 External Modem 

(optional)

 

If the internal modem should prove to be incompatible with your telephone connec-
tion, you can use the GSM modem (mobile phone modem) offered by Francotyp-
Postalia for communication with the data centre.

Warning!

 Carefully read the product information that came with the GSM 

modem before connecting it to the ultimail. Obtain information particularly, on 
the safe handling of the GSM modem. 

Caution!

 For the GSM modem to work properly, the phone numbers saved 

in the ultimail must not contain any blanks! Please check the phone numbers 
prior to using the GSM modem. Refer to the chapter 13.16 on page 126. 

Connecting the GSM modem to 
the ultimail 

• Install the GSM modem. Please read 

the product information that came with 
the GSM modem. 

• Plug the connection cable in the 

9-pin interface marked by the 

 sign

and tighten screws. The interface is 
located on the back of the machine.

• Plug the AC adapter of the GSM 

modem into a grounded single-phase 
power socket. 
Make sure your office power supply 
conforms to power requirements 
shown on the AC adapter’s label plate.

Setting up the connection via 
GSM Modem

• Go to the SET UP menu using the 

 

key. 

• Select SYSTEM SETTINGS 

 

MODEM.

GSM modem 

Connection cable

Antenna terminal

Power connection

SET UP

SYSTEM SETTINGS

MODEM

Summary of Contents for ultimail























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands