manualshive.com logo in svg

FP ultimail, Operator'S Manual

Share
Download
FP ultimail Operator'S Manual Download Page 147

Maintenance and care

147

Cleaning the print head 

• Moisten a soft, fibreless cloth with de-

ionised water.

If you do not have de-ionised water at 
hand, you can also use distilled or tap 
water. Tap water contains minerals that 
can leave deposits on the print heads 
though. 

Best results are achieved with the FP 
contact cleaner and cleaning clothes of 
the FP cleaning kit ‘clean & renew for Ink-
Jet Printsystem’, available at Francotyp-
Postalia. 

• Hold the cartridge as shown in the 

figure. The nozzles face down!

• Wipe the print head slowly and very 

softly with the cloth in the direction of 
the arrow. Repeat this procedure 
several times. 

The water will blend with ink residues on 
the print head and clean the nozzles.

• Reinsert the ink cartridge.

• Remove the other ink cartridge and 

clean it in the same manner.

• Reinsert the ink cartridge.

• Close the cartridge flap.

• Adjust the ink cartridges (see 

chapter 14.3 on page 144). 

For details on removing and inserting the 
ink cartridges, read pages 140 to 142. 

Summary of Contents for ultimail























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands