manualshive.com logo in svg

FP centormail, Operator'S Manual

Share
Download
FP centormail Operator'S Manual Download Page 114

centormail Operator Manual

114

14.17

Rate tables 

(centormail with static / dynamic scale) 

 

centormail can store up to 2 rate tables. centormail automatically checks that the rate 
table is valid.  

14.17.1 Updating the rate table 

You must update the rate table for postage rate calculation if postage regulations or 
rates have changed. centormail supports loading of rate tables from chip card. Order 
the new rate table from FP Mailing Solutions.

• Press the 

 key.

• Select L

OAD

 D

ATA

 

FROM

 C

ARD

.

• Remove the access card and insert the 

data card containing the rate table.

• Confirm the security prompt by 

pressing Y

ES

.

centormail now loads the rate table that is 
stored on the card.

• Carefully read all displayed information 

and follow the instructions.

Upon activation of a new rate table, the 
memory keys will be erased and re-
programmed. 

In the future, rate tables will automatically 
be updated during TELESET. Until this 
feature is implemented, new rate tables 
have to be loaded into centormail via  chip 
card.

Insert data card with rate table

Load Data from Card

Summary of Contents for centormail





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands