FP centormail Operator'S Manual Download Page 101

Page: 101 / 212

Advanced settings & system information

101

Manually setting summer time / day-
light savings time

If the automatic changeover function has
been disabled, you have to manually
correct the time whenever daylight
savings time starts or ends.

• Press the

key.

• Select S

YSTEM

ETTINGS

LOCK

UMMER

IME

HANGEOVER

ANUAL

centormail opens the menu to manually
set daylight savings time on / off. In the
left part of the display, centormail shows
the current setting for
– summer time (daylight savings time)

and

– clock time.

• Press O

/ O

to adjust the clock.

• S

AVE

the displayed setting.

Manual

On / Off

Save

Clock

Summer Time Changeover

System Settings

Only if “Automatic: Off” is set:

Functions in the S

UMMER

IME

HANGEOVER

(manual) menu and their meaning:

Setting the daylight savings time.

Switching off daylight savings time.

Summary of Contents for centormail





















































































































































































































Search results

Summary of Contents for centormail

Reviews:

Brands by name

Popular brands

FP centormail, Operator'S Manual

Search results

Summary of Contents for centormail

Reviews:

Brands by name

Popular brands