FP All in One Printer User Manual Download Page 4

Page: 4 / 36

ENGLIS

Conventions

Note



A note gives additional relevant information.

Caution



Indicates the presence of a hazard that can cause personal injury or property damage, if
the hazard is not avoided.

1.2

Country Specific Conditions

Denmark

In Denmark, certain types of Class 1 appliances may be provided with a plug that does not
provide an adequate earth connection when inserted into a Danish socket outlet.

Make sure the system has a good functioning connection that has protective earthing (the
plug and socket outlet must match).

Japan

•

Establish an earth connection before connecting the mains plug to the power supply.

•

First disconnect the power supply before removing the earth connection.

Languages

This manual is also available in other languages. For more information, please contact
your local supplier.

Warning
This symbol:
•

Identifies situations where improper use of the system can result in
personal injury or permanent/catastrophic damage to the system.

•

Indicates that the operator manual should be consulted.

Summary of Contents for All in One Printer





































Search results

Summary of Contents for All in One Printer

Reviews:

Related manuals for All in One Printer

Brands by name

Popular brands

FP All in One Printer, User Manual

Search results

Summary of Contents for All in One Printer

Reviews:

Related manuals for All in One Printer

Brands by name

Popular brands