FOXTECH GAIA 160MP
User Manual
©
2021 FOXTECH All Rights Reserved
11
Parameter Configuration
Launch DJI Assistant 2 and follow the prompts to complete configuration.
1. Ensure the flight control system is properly powered on.
2. Connect A3 to a PC.
3. Run DJI Assistant 2. Note that you may be asked to register for first time use.
4. Follow the prompts to upgrade the firmware to the latest version*.
5. Select the airframe type.
6. Configure the IMU and GPS mounting parameters.
7. Select the receiver type and configure the channel mapping.
8. Make sure the motors are rotating in correct direction. If not, change the rotating direction.
9. Configure the function channels.
10. Fly in the simulator to check that all functions is working normally.
Please note that firmware update may reset various Main Controller Settings, such as the RTH Altitude
and Maximum Flight Distance, to factory defaults. Before the update, take note of your preferred
settings, and readjust them after the update to suit your preference.
