FOXTECH GAIA 160MP
User Manual
©
2021 FOXTECH All Rights Reserved
13
When to Recalibrate
1.When compass data is abnormal, and the Aircraft Status Indicator is blinking red and yellow.
2.When flying in a new location, or a location that is different from your last flight.
3.When the mechanical structure of the A3/A3 Pro has changed, i.e. the mounting position of the compass
has changed.
When severe drifting occurs in flight, i.e. the A3/A3 Pro does not fly in a straight line.
Flight Functions
Flight Modes
Below flight modes are available. Use the Flight Controller mode switch to change
the flight mode of the aircraft. The details of each flight mode are found in the
section below.
Lightbridge 2 is used here as an example.
P mode (Positioning):
P mode works best when GPS signal is strong. There are three different states of P
mode, which will be automatically selected by the A3/A3 Pro depending on GPS signal strength and Vision
Positioning sensors:
P-GPS
: GPS and Vision Positioning both are available, and the aircraft is using GPS for positioning.
P-OPTI:
Vision Positioning is available but the GPS signal is not. Aircraft is using only Vision Positioning for
hovering
P-ATTI:
Neither GPS or Vision Positioning available, aircraft is using only its barometer for positioning, so
only altitude is controlled.
A mode (Attitude):
The GPS and Vision Positioning System is not used for holding position. The aircraft
only uses its barometer to maintain altitude. If it is still receiving a GPS signal, the aircraft can automatically
return home if the Remote Controller signal is lost and if the Home Point has been recorded successfully.
F mode (Function):
Intelligent Flight Mode is activated in this mode.
M mode (Manual):
The GPS and Vision Positioning System is not used for holding position. No barometer is
used to maintain altitude. Only use M mode in case of an emergency.
- P-OPTI mode is only available when a DJI Vision Positioning System is used.
- Once the GPS signal is recovered, or the Vision Positioning System available, the Flight Control System
can re-enter P-GPS mode or P-OPTI mode.
- M mode (Manual) should be enabled in DJI Assistant.
Aircraft Status Indicator Description
Normal
x2
Green Flashes Slowly Safe to Fly (P-mode with GPS and Vision Positioning)
Green Flashes Twice Safe to Fly (P-mode with Vision Positioning but without GPS)
Yellow Flashes Slowly Safe to Fly (A mode but No GPS and Vision Positioning)
