FOXTECH GAIA 160MP
User Manual
©
2021 FOXTECH All Rights Reserved
5
13.F5-F8 Pins
Multifunction PWM I / O ports.
14.F1-F4 Pins
Multifunction PWM output ports.
15.S-Bus Port
Communicates with a DJI DR16 or S-Bus receiver.
GPS-Compass Pro Module
The GPS-Compass Pro module has a built-in GPS and compass. The compass is used for geomagnetic
field measurements. Compass calibration is required before use. DO NOT use or store the compass in
environments with ferromagnetic materials.
Note that the GPS-Compass Pro module in the UPGRADE KIT is the same as the one in the A3 package.
1.Status Indicator
Indicates the status of the GPS-Compass Pro module and
triple modular redundancy system.
2.Orientation Arrow
The GPS-Compass Pro module should be mounted with the
arrow pointing to the aircraft’s nose.
3.Extended CAN1 Port
Dedicated DJI CAN-Bus port. Communicates with DJI
devices (e.g. Real Time Kinematic (RTK) GPS system).
PMU Module
Supported the LiPo batteries. with built-in PMU providing power for the whole Flight Control System and low
voltage protection function.
1.Power Port (9V 3A)
Connected to the Flight Controller for power supply.
2.iBAT
Reserved.
3. 3S-12S
Derives power from the LiPo batteries.
LED Module
The LED Module has an integrated LED Indicator and Micro USB port.
A.The LED is mainly for flight control system status indication during flight (e.g. Flight Mode).
B.In addition, there is a Micro USB port for firmware upgrades via DJI Assistant 2.
1.Flight Status Indicator
Indicates the status of the flight control system.
2.Micro USB Port
Used to configure and upgrade the A3 or A3 Pro via
DJI Assistant 2.
