background image

TRAXXAS • 11 

Note: The following instructions are for Mode 2 transmitters 

(throttle stick on the left, flight control stick on the right).

Sport Mode

For those that want to go 
beyond simply directing 

Ā

ton in the sky and explore 

what it’s like to actually take 
more control and fly, 

Ā

ton is 

equipped with 

Sport Mode

Sport (Fast) Mode uses the full capability of the 6-axis flight control 
system (auto leveling) for high-speed sport flying. Altitude hold is 
disabled and both altitude and throttle are controlled by the throttle 
stick (left stick, Mode 2). Sport Mode also enables trick functions. 

To enter Sport Mode, the 

Ā

ton should be powered on and disarmed. 

Press to click the flight control stick (right stick) once to toggle the 

Ā

ton into Sport Mode. The transmitter will beep 2 times, the green LED 

will begin flashing, and the LCD will display 

FAST

Performing tricks

In Sport (Fast) Mode, 

Āton

 can perform automated expert flips and 

rolls when you press the AUX1 button, and then enter a quick stick 
command in the chosen direction. 

Do not attempt these flight 

tricks until you are able to fly confidently in Sport Mode. 

Choose 

an area that will provide a soft landing and maintain enough altitude 
to allow room to recover control as you practice flipping the model. 
The number of flips and rolls performed can be set using the Traxxas 
Flight Link App (see page 14 for more information)

There are also menu functions in the transmitter that allow you to 
customize the settings. Refer to the instructions online for using the 
transmitter menu.

Note: Always remove camera frame and landing gear BEFORE 
attempting flight tricks.

AIR BRAKES

If you lose control of 

Ā

ton at any point, press and hold the Air Brakes 

button and 

Ā

ton will come to a stop and hover in place. When you are 

ready, release the Air Brakes button and continue flying in the currently 
selected mode (

Film

Sport

, or 

Expert

). 

RETURN TO HOME

The Return to Home button may be pressed at anytime to stabilize 

Ā

ton 

and return it to you. You may cancel return to home by pressing and 
releasing the Air Brakes button. 

Ā

ton will then be flying in 

Film Mode

 

under your control. 

ADVANCED: CHANGING MODES DURING FLIGHT

Advanced pilots may find it helpful to be able to change modes during 
flight. For example, if you are flying in 

Sport Mode

, use Return to Home, 

and then cancel return to home. 

Ā

ton will then be flying in 

Film Mode

You can switch back to 

Sport Mode

 and continue flying by pressing 

and holding the Air Brakes button, and then pressing (clicking) the flight 
control stick to toggle through the modes...one click for 

Sport Mode

, 2 

clicks for 

Expert Mode

. Release the Air Brakes button to continue flying 

in the selected mode. 

Click Once

Flashing

Selecting Sport Mode (while disarmed)

x1

x1

Front and Back Flips

Diagonal Front and Back Flips

Side Flips

1.

1.

1.

2.

2.

2.

Press AUX1

Press AUX1

Press AUX1

Front Flip

Left Flip

Right Flip

Diagonal Front Right

Diagonal Front Left

Diagonal Back Right

Back Flip

Diagonal Back Left

Summary of Contents for Aton

Page 1: ... are also menu functions in the transmitter that allow you to customize the settings Refer to the instructions online for using the transmitter menu Note Always remove camera frame and landing gear BEFORE attempting flight tricks AIR BRAKES If you lose control of Āton at any point press and hold the Air Brakes button and Āton will come to a stop and hover in place When you are ready release the Ai...

Page 2: ...harge remains WARNING Do not store or attempt to charge a swollen or damaged battery See Safety Precautions on page 5 for more information on LiPo batteries ROTOR BLADE INSTALLATION The Āton s rotor blades are not identical Each blade is labeled with an A or B When installing replacement rotor blades be certain to install the rotor blades with the corresponding A or B for each of the legs A or B l...

Page 3: ...LED on the transmitter solid green Power and Info Status LEDs on the helicopter and the Disarmed Flight Screen on the transmitter LCD 3 The model is not armed or has timed out To arm your helicopter see step 6 of the Preparing for Flight section on page 6 The transmitter settings have been adjusted incorrectly for optimal flight 1 Return the transmitter to the default settings A Ensure the transmi...

Page 4: ... buttons Visit Traxxas com for a guide to using the built in transmitter menu functions Updating Firmware Your Āton has the ability to receive firmware updates that can add new features and capabilities Firmware updates are performed via a microSD card not included that installs on the main board The microSD card slot can be accessed by removing the front canopy two screws Visit Traxxas com for th...

Reviews: