Foxconn P35A Series Page 9 User Manual Download

Page: 9 / 117

1-1 Product Specifications

CPU

Support Intel® Core

2 Extreme processor/

Intel® Core

2 Quad processor / Intel® Core

2 Duo processor /

Intel® Pentium®

4 processor Extreme Edition/

Intel® Pentium® D processor / Intel® Pentium®

4 processor /

Support for Intel® Hyper-Threading Technology

Front Side Bus

1333/1066/800MHz FSB

Chipset

North Bridge : Intel® P35 chipset

South Bridge : Intel® ICH9 (P35A)/ICH9R (P35A-S)

Memory

4 x 240-pin DDR2 DIMM sockets

Support up to 8GB of system memory

Dual channel DDR2 800/667MHz architecture

Audio

Realtek ALC888 chip

High Definition Audio

2/4/5.1/7.1-channel

Support for S/PDIF out

Support Jack-Sensing function

LAN

On board Realtek 8111B chip

Support 10/100/1000Mb/s Ethernet

Expansion Slots

2 x PCI Express x16 slots

1 x PCI Express x1 slot

3 x PCI slots

Onboard Serial ATA 6 x SATA connectors and one external SATA connector (P35A-S)

4 x SATA connectors and one external SATA connector (P35A)

300MB/s data transfer rate

Support hot plug and NCQ (Native Command Queuing )

Support RAID 0, RAID 1, RAID 5, RAID 10 (for P35A-S)

Support Intel® Matrix Storage Technology (for P35A-S)

USB

Support hot plug

Support up to 12 x USB 2.0 ports (4 rear panel ports, 4 onboard USB

connectors supporting 8 extra ports)

Support USB 2.0 protocol up to 480Mb/s

Internal Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

1 x Floppy disk drive connector

1 x IDE connector

6 x (P35A-S) or 4 x (P35A) SATA connectors

4 x USB 2.0 connectors (supporting 8 x USB devices)

1 x CPU fan header (4-pin)

1 x System fan header (4-pin)

3 x Power fan headers (3-pin) (FAN1/2/3)

1 x Front panel connectors

1 x 1394a connector (P35A-S only)

1 x CD_IN connector

Summary of Contents for P35A Series






















































































































Search results

Summary of Contents for P35A Series

Reviews:

Related manuals for P35A Series

Brands by name

Popular brands

Foxconn P35A Series, User Manual

Search results

Summary of Contents for P35A Series

Reviews:

Related manuals for P35A Series

Brands by name

Popular brands