Foxconn P35A Series Page 36 User Manual Download | Manualshive

Page: 36 / 117

background image

3

29

CPU Configuration

► Super Clock Free

This item is used for the Super Clock Free technology. It supports adjustable CPU Multiplier,
perform better FSB, more options for overclocking.
It is available only when the CPU is not the XE CPU and EIST is enabled.

► Intel

®

SpeedStep(tm) tech.

This item is used specifically for the Enhanced Intel SpeedStep technology (EIST), the options

are :
[Enabled] : CPU speed is controlled by the operating system.
[Disabled] : Use default CPU speed.

► C1E Support

C1E represents Enhanced HALT State. It is a feature which Intel CPU uses to reduce power
consumption when in halt state. C1E drops the CPU's multiplier and voltage to lower levels
when a HLT (halt) command is issued. This item is used to enable/disable the C1E support.

► CPU Thermal Meter Function

For the processor with CPUID below 04F1H, when CPU is running up to a higher frequency,

enable Thermal Meter will automatically keep Front Side Bus to run at a limited speed, so to
protect your system.

When CPU frequency >=3.6GHz, maximum FSB is 800MHz

When CPU frequency >=2.8GHz, maximum FSB is 533MHz.
Disabling this feature may come out a high temperature system, and system would crash.

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.

CPU Configuration

Configure advanced CPU settings

Help Item

Manufacturer:Intel

It is available

Intel(R) Core(TM)2 CPU

4300 @ 1.80GHz

only when the CPU

Frequency

:1.80GHz

is not the XE CPU

FSB Speed

:800MHz

and EIST is enabled

Cache L1

:32 KB

Cache L2

:2048 KB

Ratio Status

:Unlocked (Min:06, Max:09)

Ration Actual Value:9

Super Clock Free

[Disabled]

Intel(R) Speedstep(tm) Tech

[Enabled]

CIE Support

[Enabled]

CPU TM Function:

[Enabled]

Execute Disable Bit

[Enabled]

Core Multi-Processing

[Enabled]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults

[Disabled]

Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically
adjust processor voltage and core frequency, which can result in decreased average
power consumption and decreased average heat production. There are some
system requirements must be met, including CPU, chipset, motherboard, BIOS and
operation system. Please refer to Intel website for more information.

CA

UT

IO

N

!

«
...
34
35
36
37
38
...
»

Summary of Contents for P35A Series






















































































































Reviews:

No comments

Related manuals for P35A Series

Brand: Abit Pages: 120

Brand: Kaba Pages: 16

Brand: OLIMEX Pages: 12

Brand: Garz Fricke Pages: 35

Brand: ST Pages: 79

Brand: Biostar Pages: 47

Brand: Texas Instruments Pages: 47

Brand: JETWAY Pages: 48

Brand: DFI Pages: 92

Brand: Semtech Pages: 16

TLE986 Evalboard Series

Brand: Infineon Pages: 20

Brand: MSI Pages: 32

Brand: Texas Instruments Pages: 14

Brand: Acorp Pages: 46

Brand: EVGA Pages: 163

Brand: MATSONIC Pages: 76

P4 Titan GA-8SIMLH-P

Brand: Gigabyte Pages: 104

Brand: Microchip Technology Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands