76
5
5-2 BIOS Configuration
1. Enter the BIOS setup by pressing <DEL> key during the POST(Power On Self Test).
2. Select the “Advanced BIOS Features” from the “Main menu”, then select the
“IDE
Configuration” item and press <Enter> to go to the configuration items.
3. Set the “SATA Mode Select” option to [RAID].
4. Press <F10> to save the setting then PC will reboot itself.
5-3 Create RAID in bIoS
enter RAID bIoS Setup
When BIOS is restarted, it will display a message asking you to press <Ctrl><I> keys
simultaneously to enter the main menu of Intel
®
Matrix Storage Manager Option ROM
Utility. Press the <Ctrl+I> to enter Configuration Utility.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
3. Reset Disks to Non-RAID
2. Delete RAID Volume
4. Exit
RAID Volume :
None Defined.
Physical Disks:
Port Drive Model
Serial #
Size
Type/Status(Vol ID)
0
WDC WD2500JS-60N WD-WCANKC865380 232.9GB
Non-RAID Disk
2
Maxtor 6L250S0
L50SKP4G
232.9GB
Non-RAID Disk
4
ST3320620SV
9QF4YJGQ
298.1GB
Non-RAID Disk
5
ST3300831AS
3NF02XH2
279.5GB
Non-RAID Disk
[↑↓]-Select [ESC]-Exit [Enter]-Select Menu
Intel(R) Matrix Storage Manager option ROM v7.6.0.1006 ICH9R wRAID5
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
[
DISC/VOLUME INFORMATION
]
[
Main Menu
]
1. Create RAID Volume
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
IDE Configuration
IDE Configuration
Help Item
SATA Mode Select
[RAID]
Select SATA Work Mode
Max Ports on SATA
[6 Ports]
► AHCI Configuration
[Press Enter]
Intel Matrix Storage
► Primary IDE Master
[Not Detected]
Manager driver only
► Primary IDE Slave
[Not Detected]
support on
► Secondary IDE Master
[Not Detected]
ICH9R( P35A-S ),
► Secondary IDE Slave
[Not Detected]
not ICH9. ( P35A )
So if your MB is with
IDE Detect Time Out (Sec)
[35]
ICH9 chip, then you
can't enable AHCI in
Windows XP,
Windows Vista
has in-box driver.
So it's ok.
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults
[RAID]