2
10
Install the CPU Cooler
Follow the steps below to correctly install the CPU cooler on the motherboard. (The following
procedures use Foxconn cooler as the example.)
1. Apply and spread an even
thermal grease on the surface of
CPU.
2. Place the four bolts of the
CPU cooler to the holes of the
motherboard, push them straight
down from the top, and the bolts will
be fastened on the motherboard.
That's it.
3. Check the solder side of the
motherboard, the push pin should
be fixed as depicted in the picture.
3
2
1
4. Attach the 4-wire CPU cooler
connector to the CPU FAN socket
on the motherboard .
Release bolts of CPU cooler from
motherboard :
1. Turning the push pin (bolt)
along with the direction of arrow
(counterclockwise).
2. Pull the push pin straight up.
3. Turning push pin clockwise to its
default position.
Use extreme care when removing the CPU cooler because the thermal grease may
adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.
CA
UT
IO
N
!