Foxconn P35A Series User Manual Download

Page: 109 / 117

102

7. Depending on South Bridge chip of your system, select appropriate driver for it.

Here, we choose Intel

ICH8R/ICH9R SATA RAID Controller. Press <Enter> to

select it.

8. A confirmation message pops out to double check if the driver is really what we

wanted. Press <Enter> to continue.

Windows Setup

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

ENTER=Select F3=Exit

Intel(R) ICH9 SATA AHCI Controller (Desktop ICH9H)

Intel(R) 82801HEM SATA RAID Controller (Mobile ICH8M-E)

Intel(R) 82801HBM SATA AHCI Controller (Mobile ICH8M-E/M)

Intel(R) ICH8R/ICH9R SATA RAID Controller

Windows Setup

Setup will load support for the following mass storage device(s):

Intel(R) ICH8R/ICH9R SATA RAID Controller

* To specify additional SCSI adapters, CD-ROM drivers, or special

disk controllers for use with Windows, including those for

which you have a device support disk from a mass storage device

manufacturer, press S.

* If you do not have any device support disks from a mass storage

device manufacturer, or do not want to specify additional

mass storage devices for use with Windows, press ENTER.

S=Specify Additional Device ENTER=Continue F3=Exit

P35A AHCI - Select Intel(R) ICH9 SATA AHCI Controller (Desktop ICH9H).
P35A-S AHCI - Select Intel(R) ICH9 SATA AHCI Controller (Desktop ICH9H).
P35A-S RAID - Select Intel(R) ICH8R/ICH9R SATA RAID Controller.

Summary of Contents for P35A Series






















































































































Search results

Summary of Contents for P35A Series

Reviews:

Related manuals for P35A Series

Brands by name

Popular brands

Foxconn P35A Series, User Manual

Search results

Summary of Contents for P35A Series

Reviews:

Related manuals for P35A Series

Brands by name

Popular brands