19
2
19
■
Make sure the power supply is turned off before pressing the CLS_CMOS button to
clear CMOS.
■
Push down the CLS_CMOS button and hold it there for a couple of seconds to clear
the CMOS completely, then release.
CA
UT
IO
N
!
2-6 onboard button
Power on button: PWR_oN
Push the power on button to power on the system.
Reset button: RST
Push the reset button to reboot the system.
Clear CMoS button: ClS_CMoS2
Turn off the AC power supply, push the CLS_CMOS
button and hold there for a couple of seconds to clear
CMOS.
force Reset button: foRCe_ReSeT (only for
Inferno Katana)
Simply rebooting after applying new OC settings can
cause the system to fail because the hardware has not
been reset properly. But with one press on the Force
Reset button, your system will not only re-boot, but also
re-tune itself! This button triggers the CPU, memory
controller and chipset to re-initialize, running hardware
checks and timing algorithms before reloading with your
new overclocking settings. This reduces instances of
failed re-boots after implementing OC settings.
POWER_ON CLS_CMOS
RESET
2-7 OnBoard Debug LED
2-digital LED readout displays hardware status and
enables quick error diagnosis.
FORCE_RESET
