1
5
1-3 back Panel Connectors
1. PS/2 Keyboard Port
Use the upper port (purple) to connect a PS/2 keyboard.
2.
USb Ports
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as an
USB keyboard/mouse, USB printer, USB flash drive and etc.
3. Clear CMoS button
Turn off the AC power supply, push the CLS_CMOS button and hold there for a couple of
seconds to clear CMOS.
4. Coaxial S/PDIf out Port
This port provides digital audio out to an external audio system that supports digital coaxial
audio. Before using this feature, ensure that your audio system provides a coaxial digital audio
in connector.
5. optical S/PDIf out Port
This port provides digital audio out to an external audio system that supports digital optical
audio.
6. 1394a Port (only for Inferno Katana)
This port is used to connect a 1394a device.
7. external SATA Ports (only for Inferno Katana)
To connect external SATA device(s) to your system by expanding the internal SATA port(s) to
the chassis back panel. External SATA device shall provide power by its own.
Inferno Katana:
LAN Port
PS/2 Keyboard Port
8
USB Ports
1
6
1394a Port
External
SATA Ports
4
7
Optical S/PDIF
Out Port
5
2
USB Ports
Coaxial S/PDIF
Out Port
9
Audio Ports
2
3
Clear CMOS
Button
Line Out
Microphone
Subwoofer
Rear Speaker
Side Speaker
Line In
Inferno Katana GTI:
