Model FT2
101364
4.
Programming
4.1.
Programming using the Local Display
4.1.1.
Data Entry using the local display module
There are 2 basic types of menu entries: one for changing value or string and one for selecting
from a selection list.
4.1.1.1.
To Change a Value or String :
Press
CHG (F1)
key to change the value,
OK (F4)
to accept the value.
Press the
UP (F1) or DN (F2)
key to select a new digit or character, the cursor points to
the selected digit. Press
NXT (F3)
to select the next digit and
OK (F4)
to accept the
entry.
Note: If the
UP (F1) or DN (F2)
key is held down for more the 1 second, the program
will progressively select new digits at increasing speed as time increases.
VALUE = 0.91234
CHG
OK
F1
F2
F3
F4
VALUE = 0.91234
UP DN NXT OK
F1
F2
F3
F4
4.1.1.2.
To Select from a List:
Press
NXT (F1)
key repeatedly until the correct selection is made and
OK (F4)
key to
accept the entry.
FLO UNT = SCFM
NXT OK
F1
F2
F3
F4
Page 28
Fox Thermal Instruments, Inc., 399 Reservation Road, Marina, CA 93933
